| Screen Size: |
1.02-7.62 m (40-300 inches), 16:10 aspect ratio |
| Native Resolution: |
1280 x 800 |
| Brightness (ANSI lumens): |
4,000 lumens (lamp mode: NORMAL) |
| Lamp Type: |
300 W (max. 310 W) UHM lamp |
| Optical Axis Shift: |
Vertical: +70% (manual), horizontal: +/- 10% (manual) |
| Lens: |
Manual zoom (2x zoom), manual focus F 2.0-3.4, f 21.5-43.0mm |
| Power Supply: |
100-240 V AC, 5.0-1.9 A, 50/60 Hz |
| Power Consumption: |
415 W (500 VA) (0.3 W at 100-120 V AC, 0.4 W at 220-240 V AC with standby mode set to ECO, 15 W with standby mode set to NORMAL) |
| Panel Size: |
.65" diagonal (16:10 aspect) |
| Display Method: |
DLP TM chip x 1, DLP TM system |
| Pixels: |
1,024,000 (1,280 x 800) x 1, total of 1,024,000 pixels |
| Center-to-corner uniformity: |
90% |
| RGB: |
fH: 15 kHz - 100 kHz, fV: 24 Hz - 120 Hz, dot clock: 162 MHz or lower |
| S-Video/Video: |
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60] |
| Keystone correction range: |
Vertical: ±40° |
| Installation: |
Ceiling/floor, front/rear |
| DVI-D in: |
DVI-D 24-pin x 1 DVI 1.0 compliant 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,VGA (640 x 480)-WUXGA (1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25 - 162 MHz |
| Power cord length: |
3.0 m (9 ft 10 in) |
| Dimensions (W X H X D): |
332 x 168 x 484.5 mm (13-1/16˝ x 6-5/8˝ x 19-1/16˝ ) (including the lens) |
| Weight: |
Approximately 8.5 kg (18.7lbs) |
| Operating temperature: |
0°C-45°C (32°F-113°F) |
| Operating humidity: |
20%-80% (no condensation) |
| Supplied accessories: |
Power cord with security lock, wireless remote control unit, batteries for remote control (AA type) x 2, wire rope, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software Ver. 2, Wireless Manager ME 5.5) |
| REMOTE 1 IN: |
M3 jack x 1 (for wired remote control) |
| LAN: |
RJ-45 for network connection, 10Base-T/100Base-TX, compliant with PJLink TM |
| S-VIDEO In: |
Mini DIN 4-pin x 1 (S-Video) |
| VIDEO In: |
BNC x 1 (composite video) |
| SERIAL IN: |
D-sub 9-pin (female) x 1 (for external control, RS-232C compliant) |
| HDMI IN: |
HDMI 19-pin × 1, Deep Color, HDCP compatible 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p |
| RGB 1 IN: |
BNC x 5 |
| RGB 2 IN: |
D-Sub HD 15-pin (female) x 1 |
| HDMI/DVI/D: |
fH: 27 kHz - 100 kHz, fV: 24 Hz - 120 Hz, dot clock: 25 MHz - 162 MHz |
| WIRELESS MODULE: |
Connector for optional wireless module ET-WM200U/WM200E × 1 |
| DLP™ chip Panel size: |
16.5 mm (0.65 inches) diagonal, 16:10 aspect ratio |
| DLP™ chip Display Method: |
DLP™ chip x 1, DLP™ projection system |
| DLP™ chip Pixels: |
1,024,000 (1,280 x 800) pixels |
| Lamp: |
300 W (max. 310 W) UHM lamp |
| Brightness: |
4,000 lumens (lamp mode: NORMAL) |
| Scanning Frequency RGB: |
fH: 15 kHz-100 kHz, fV: 24 Hz-120 Hz, dot clock: 162 MHz or lower |
| Scanning Frequency S-Video/Video: |
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
| Terminal - SERIAL IN: |
D-sub 9-pin (female) x 1 (for external control, RS-232C compliant) |
| Terminal - Video In: |
BNC x 1 (composite video) |
| Terminal - S Video In: |
Mini DIN 4-pin x 1 (S-Video) |
| Terminal - LAN: |
RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™) |
| Terminal - RGB 2 IN: |
D-sub HD 15-pin (female) x 1 (RGB/ YPBPR x 1) |
| Resolution: |
1,280 x 800 pixels (Input signals that exceed this resolution will be converted to 1,280 x 800 pixels. |
| Terminal - RGB 1 IN: |
BNC x 5 (RGB/ YPBPR x 1) |
| Contrast: |
2,000:1 (full on/full off) |
| Optical axis shift - Horizontal: |
±10% from center of screen (manual) |
| Optical axis shift - Vertical: |
+70% from center of screen (manual) |
| Scanning frequency HDMI/DVI-D: |
fH: 27 kHz-100 kHz, fV: 24 Hz-120 Hz, dot clock: 25 MHz-162 MHz |
| Terminal - AUDIO IN 1: |
RCA x 2 (L, R x 1), 0.5 Vrms |
| Terminal - AUDIO IN 3: |
M3 x 1 (L, R x 1), 0.5 Vrms |
| Terminal - AUDIO IN 2: |
M3 x 1 (L, R x 1), 0.5 Vrms |
| Terminal - AUDIO OUT: |
M3 x 1 (L, R x 1) (monitor out: 0-2.0 Vrms, variable) |
| Terminal - REMOTE IN: |
D-sub 9-pin (female) x 1 for external control (contact control) |
| Terminal - WIRELESS MODULE: |
Connector for optional wireless module ET-WM200 x 1 |
